Customization: | Available |
---|---|
Read-Write Method: | Contact Type |
Installation: | External (634) |
Still deciding? Get samples of US$ 23/Piece
Order Sample
|
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
|
---|---|
Support payments in USD |
Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Card Standard | ISO 7811/7812 | |||
Track Position | ISO1 (IATA), | ISO2, | ISO3 (MINTS) | |
Recording Density | 210 BPI | 75 BPI | 210 BPI | |
Recording Capacity | 79 Characters | 40 Characters | 107 Characters | |
Power Supply | +5V DC ±5% | |||
Power consumption | 65mA(max.) | |||
IDDQ | 25mA | |||
Head Function | Magnetic track width:1.5mm | |||
Card thickness | PVC 0.76 ± 0.08mm | |||
Operation Speed | 10 ~ 150cm/sec | |||
Error Rate | 0.5% Less Than (JSE Test card) | |||
Working place | Indoor | |||
Head life | 500,000 card passes (1 pass : one swipe) | |||
Temperature | Operation:-20°C ~ 70°C, Storage: -30°C ~ 70°C | |||
Humidity | Operation:20 ~ 90% RH , storage:Less than 95% RH | |||
Dimension | see dimension drawing |
Operating:
Standards: ISO/ANSI/AAMVA/CA DMV
Recording Method: Two-frequency coherent phase (F2F)
Message Format: ASCII
Card Speed: 10cm/sec. ~140cm./sec (5 ips ~55 ips)
MTBF: Electronics - 100,000 hours; Head Life - 500,000 passes
Environment :
Operating Temp : -10ºC ~ +60ºC
Storage Temp : -20 ~ +65ºC
Humidity : 10 ~ 90 % relative
Picture
Package
FAQ
1. What is the interface of this device?
The card reader uses the RS232 interface or USB interface for communication.
2. Determine whether to install the driver?
Yes, in order to be able to run card reader properly, you need to install the appropriate drivers in advance. The driver can be downloaded from the official website.
4. How to calibrate the equipment?
You can calibrate the device using the calibration card included with the MSR1003. For details, refer to the device manual.