Manual RS232 DIP Card Reader Smart Card Reader Module
Overveiw
RCR-2231 series(formerly WBSM-1100 series ) is a manual insertion type IC card reader/writer module, IC card in accordance with ISO 7811/7816, and supports T=0 protocol and T=1 protocol. It has a semi-transparent and LED light bezel that the LED
Light can change a variety of colors. In addition, it has a TTL interface.
Features
Compliant with ISO7816-1, 2, 3, 4
Read/write T=0/T=1
Read/write SLE4442, SLE4428 and other compatible products
Read/write AT24C01A/02/04/08/16/32/64/128/256, AT88SC10X, and other compatible products
Use the new design IC card connector to reduce the destruction of cards
Electrical circuit protection, preventing the wrong operation on the cards. Prohibition of read/write operations on cards when the power supply is not stable
Specifications
| Power Supply |
+5VDC (± 5%) |
| Current |
<60mA |
| Life Time |
>100,000 cycles |
| Interface |
RS232 |
| Baud Rate |
9600(default)~115200 BPS |
| Temperature |
Operation: 0ºC~ +60ºC Storage: -20ºC~ + 60ºC |
| Humidity |
Operation: 20 %~ 90% RH Storage:5% ~ 95% RH |
| Weight |
Appox. 50g |
| Dimension |
75mm(L) X 70mm(W) X 13mm(H) |
Maintenance
There will be something dirty on the IC card contact, which will influence IC card reading and writing after being used for a while. Therefore, we must make certain maintenance for the card reader. The specific procedure is as follows:
- Using a cleaning card to clean dirty things on the IC contact.
- Periodical maintenance: it needs to be cleaned once when carded in and out 20,000 times. (count once when the card is in and out.)
Contact maintenance: it will cause IC card and contact touch error when there are dirty things onthe contact. It should clean the contact pin. The main method is that we use a cleaning card with alcohol to clean the card reader, make auto test on the IC card operation.
Picture
Card Reader with Semi-transparent Bezel
Card Reader Module
Card Reader with Black Bezel
Business Partner
FAQ
1. What is the baud rate of the dip card reader?
The baud rate of the dip card reader is between 9600 (default) and 115200 BPS.
2. What is the lifetime of the dip card reader?
The lifetime of the dip card reader is 100,000 cycles.
Audited Supplier 
){kind=link}